22 KW EV Charger AC Electric Vehicle Charging Stations

22 KW EV Charger AC Electric Vehicle Charging Stations

Product Description About Company Certificates About sample Sample cost? Sample can be provided, you have to pay for it by its unit price About Product quality The certifications? All of our EV charging products posses with CE, TUV certifications ,J1772 products posses with UL certification...

Send InquiryChat Now
Product Details

    4

  

UPGRADE YOUR GARAGE OR DRIVEWAY WITH

    The charger can be installed inside or outside, on a wall or a special installation pole. Despite being among the most compact on the market, it packs all the necessary equipment for safe charging. The charging cable can be neatly folded on the plug holder to keep it in place and readily available.

     1

Apply to Vehicle

    Chevrolet Volt, Citroen C-Zero, Fisker Karma, Ford Focus Electric, Ford C-Max Energi, Mia, Mia Electric Van, Mitsubishi-I Miev, Mitsubishi Outlander Phev, Nissan NV200 SE Van, Nissan Leaf, Peugeot Ion, Renault Fluence, Renault Kangoo, Smiths Edison Van, Smiths Newton, Tata Indica Vista EV, Toyota Prius, Vauxhall Ampera...

     7

Equipment Specification Table  

Power Input

Input Rating

400V ±10% 50Hz

Power Output

Output Voltage

AC 400V 32A 3-phase

Protection

Output Current

32 A 3-phase

Total Power

22 kW

Protection

Over current, Under voltage, Over voltage, Residual current, Surge protection,

Short circuit,Over temperature, Ground fault

Control

Push Buttons

Emergency stop button (Red)

Charge Options

Charge options to be provided upon request: Charge by duration, Charge by energy

Charging Interface

Type 2

Communication

User Authentication

ISO14443 Type A/B RFID for user authentication (13.54MHz)

Environmental

Operating Temperature

-35℃~65℃

Storage Temperature

-40 ℃ to +70 ℃

Humidity

<95% relative humidity, non-condensing

Altitude

≤6000 feet (2000 m)

Mechanical

Ingress Protection

IP55

Overcurrent Protection Included

40A MCB Type B per socket

Residual Current Protection

RCD Type A 30mA per socket.

Enclosure Protection against

IK10 according to IEC 62262

Weight

6.8 kgs

Socket

Mode 3(IEC 61851)
Type 2 (UNE EN 62196-1)

Outer Casing

Monocoque shell made from 1.5 mm Stainless, Powder Coated Steel

Dimension (W x H x D)

285*200*120mm

Regulation

Certificate / Compliance

CE / IEC 61851.1-2017, IEC 62196-3


Caution of Using

  • In order to ensure the normal service life of the charging station and reduce the use risk, maintenance must be performed within the specified time; the maintenance of the equipment needs to be completed by professionals, and the use of qualified and safe maintenance tools.

  • The product is already packed in the factory, and during transportation, strong impact and bumps should be avoided to avoid damage to the outer packaging of the product. The product should be placed at an ambient temperature of -40°C~+80°C and a relative humidity of no more than 95%. The ambient air should not contain acids, alkalis or other corrosive gases and explosive gases, and it should be protected from rain, snow, wind and sand.

  • Failure to follow instructions may result in danger; 

  • Please use the charging stand only if it is in accordance with the normal operation of the technology and safe operation; 

  • Children are prohibited from touching charging station; 

  • Install a charging station away from pyrotechnics, dust and corrosive occasions; 

  • The output of the charging station is high pressure, and you must pay attention to personal safety when using it;

  • If the charging station fails, there is a danger of electric shock and even death. Under emergency situations, you can cut off the power supply;

  • Do not disassemble the charging station during the use

3




Hot Tags: 22 kw ev charger ac electric vehicle charging stations, suppliers, manufacturers, factory, wholesale, customized, quotation, pricelist
Related Products
Inquiry